---

Design
Mathematical and designed to produce an exact turns ratio.
Input Source
Designed for a low impedance source, such as an operational amplifier or transistor with a maximum input voltage of 7.5Vrms.
Output
This ouput is designed for an impedance greater then 600 Ohms.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbins
EDCOR's royal blue bobbin with black finishing tape.
Termination/Mounting
This unit is designed for printed circuit boards. For footprint and suggested hole and pad size please see the dimensional drawing.
Copper Shield
This unit has an outer copper shield.

---

Maximum Input: 7.5Vrms

Input: Low Impedance

Output: >600 Ohms

Turns Ratio: 2+2:1+1

Frequency Response: 10~50,000 Hz, <1 dBu

THD+N @ 1KHz: <0.01%

Isolation: 500Vrms

Input DCR: 104 Ohms & 120 Ohms

Output DCR: 64 Ohms & 56 Ohms

Bobbin: Glass Filled Nylon 6/6

Flammability Rate: Class B 130°

Core Type: M-6 29 ga. Grain Oriented Steel.

Mounting: PCB mounted

Unit Weight: 0.50 lbs.

Dimensional Drawing: 15000-EI625-050-P12

Plot: Frequency Response/THD+N

---

XS1100