Menu
Search
Filters
Close
Menu

BuzzBucker BZ-100

Previous productBuzzBucker BZ-100
Next productBuzzBucker BZ-100
Removes audio buzz and hum. 1:1 fully isolated, broad frequency, mono unbalanced line (instrument level) matcher.
Availability: In Stock
Ship date: 3-5 days
2 review(s) | Add your review
5.0 2
$39.17

Recording Quality Sound
These isolation boxes use high quality low noise components to deliver broadcast and recording quality sound.

Design
Each unit is designed to operate continuously. It is a bi-filer wound matching transformer, to provide full isolation, brooad frequency range, and excellent coupling.

Unbalanced Line Input
This is an unbalanced line input designed for instruments. The connector is an unbalanced standard 1/4" phono jack. This input is ideal for instruments such as electric guitars, acoustic guitars with pickups, or electric bass guitars.

Unbalanced Line Output
This is an unbalanced line output. The connector is an unbalanced standard 1/4" phono jack.

Enclosure
The enclosure is a rugged cast aluminum box. It is powder coated black for a clean look and to hide away on stage.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Recording Quality Sound
These isolation boxes use high quality low noise components to deliver broadcast and recording quality sound.

Design
Each unit is designed to operate continuously. It is a bi-filer wound matching transformer, to provide full isolation, brooad frequency range, and excellent coupling.

Unbalanced Line Input
This is an unbalanced line input designed for instruments. The connector is an unbalanced standard 1/4" phono jack. This input is ideal for instruments such as electric guitars, acoustic guitars with pickups, or electric bass guitars.

Unbalanced Line Output
This is an unbalanced line output. The connector is an unbalanced standard 1/4" phono jack.

Enclosure
The enclosure is a rugged cast aluminum box. It is powder coated black for a clean look and to hide away on stage.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Products specifications
Input Maximum Voltage 10Vrms
Input Unbalanced line (instrument) level
Output Unbalanced line (instrument) level
Turns Ratio 1:1
Winding Configuration Bi-filer Winding
Frequency 20~20K+ Hz., @ <1dBu
THD+Noise <0.05% @ 1K Hz.
Enclosure Black Powder Coated Cast Aluminum
Mounting Surface Mounted
Weight 0.75 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Existing reviews
Contact from Edcor
Note:  I was contacted by Edcor about my review in less than an hour.  They have offered to help me make the unit work or even offer a refund.  INCREDIBLE customer service!!
From: Thomas Gilmartin | Date: 5/16/2018 9:58 AM
Was this review helpful? Yes No (1/0)
Elegant Solution
Needed to plug my guitar into a computer driven mixing console, but kept getting buzzing and a constant hum. The problem was that the console interface needs low-impedance balance level in. Guitar is high-impedance and I was getting weird signal noise (buzzing and a hum).

After some research and testing, I found I needed a DI box. But many on the market are way too overpriced. There are a few low cost passive DI boxes, but you get what you pay for. Users complained of cheap materials, plastic boxes, bad jacks, etc. I also found some were way too complicated, adding XLR jacks, switches, and stuff I didn’t need.

When I found Edcor’s Buzz Bucker, it fit the bill perfectly. Metal housing, solid feel, sturdy 1/4” jacks, and no frills. Plugged it in and noises were gone! The price was perfect and customer service fast and excellent.
From: Gregory Sahd | Date: 9/22/2019 6:04 PM
Was this review helpful? Yes No (0/0)
Product Files
Dimensional Drawings
Frequency Response/THD+N
Manual
Products specifications
Input Maximum Voltage 10Vrms
Input Unbalanced line (instrument) level
Output Unbalanced line (instrument) level
Turns Ratio 1:1
Winding Configuration Bi-filer Winding
Frequency 20~20K+ Hz., @ <1dBu
THD+Noise <0.05% @ 1K Hz.
Enclosure Black Powder Coated Cast Aluminum
Mounting Surface Mounted
Weight 0.75 lbs.
Compliance RoHS & REACH
Product tags

Related Products

  • Picture of PC Series

    PC Series

    1/4W balanced or unbalanced to balanced or unbalanced line level matching transformer.

    $11.02
  • Picture of WSM Series

    WSM Series

    1/2W line level matching transformer.

    $13.34
  • Picture of TPC Matcher Series

    TPC Matcher Series

    Balanced or unbalanced to balanced or unbalanced transformer on a printed circuit board.

    $20.59
  • Picture of UMM Series

    UMM Series

    Unbalanced to unbalanced with three primary impedance taps and three secondary impedance taps.

    $15.38

Customers Who Bought This Item Also Bought

  • Picture of PCW Series

    PCW Series

    1/2W balanced or unbalanced to balanced or unbalanced line level matching transformer.

    $13.29
  • Picture of CXPP10-8K

    CXPP10-8K

    10W, push-pull tube output transformer for 8K Ohms to a specified output.

    $48.51
  • Picture of XPWR104-120

    XPWR104-120

    Power transformer for a 120V, 60Hz. line to 250V (125-0-125) at 125mA center tapped and 6.3V at 2A.

    $49.42
  • Picture of CXPP100-1.7K

    CXPP100-1.7K

    100W, push-pull tube output transformer for 1.7K Ohms to a specified output.

    $90.86
  • Picture of XPWR094

    XPWR094

    Power transformer for a 120V, 60Hz. line to 170V at 250mA and 12V (6-0-6) at 2.5A center tapped.

    $45.05
Categories
Recently viewed products
Popular tags
View all
Contacts
Information
New products
Announcements
The Ultimate Match Master - Thursday, July 18, 2013
A new multi-matching transformer for your matching needs.
details
The Design - Monday, August 27, 2012
Transformers are the least understood of all components. We thought we would give you some insight into the design.
details
[View Announcements Archive]
Copyright © 1997 - 2020 EDCOR Electronics Corporation.