Search
Filters
Close
Balanced or unbalanced 15K Ohms to balanced or unbalanced 10K Ohms transformer on a printed circuit board.
Availability: Product is built to order.
Ship date: 3 weeks
$23.72

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Balanced or Unbalanced Input
This is an unbalanced input with impedance taps of 15K Ohms. The connector is 3 pin screw Eurostyle connector.

Balanced or Unbalanced Output
This is an unbalanced output with impedance taps of 10K Ohms. The connector is 3 pin screw Eurostyle connector.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Broadcast Quality Sound
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Continuous Use Design
Each unit is designed to operate continuously.

Balanced or Unbalanced Input
This is an unbalanced input with impedance taps of 15K Ohms. The connector is 3 pin screw Eurostyle connector.

Balanced or Unbalanced Output
This is an unbalanced output with impedance taps of 10K Ohms. The connector is 3 pin screw Eurostyle connector.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's royal blue bobbin with black finishing tape.

Surface Mounting
The unit is designed for surface mounting with the use of four screws or with double back tape (not provided).

Products specifications
Wattage 0.5W
Turns Ratio 1.2:1
Input Maximum Voltage 5Vrms
Primary (input) Impedance 15K Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination Eurostyle connector
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.25 lbs.
Compliance RoHS & REACH
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Product Files
Products specifications
Wattage 0.5W
Turns Ratio 1.2:1
Input Maximum Voltage 5Vrms
Primary (input) Impedance 15K Ohms
Secondary (output) Impedance 10K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination Eurostyle connector
Printed Circuit Board Material FR-4
Mounting Surface Mounted
Weight 0.25 lbs.
Compliance RoHS & REACH
Product tags