Mathematically designed to produce the turns ratio for microphone or line level signal needed.
This is an unbalanced input with impedance taps of 2.5K Ohms, 5K Ohms, and 10K Ohms.
This is an unbalanced output with impedance taps of 2.5K Ohms, 5K Ohms, and 10K Ohms.
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
EDCOR's glass filled bobbin with black finishing tape.
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.