Search
Filters
Close
Unbalanced 5K/10K/20K to unbalanced 5K/10K/20K Ohms. Three primary impedance taps and three secondary impedance taps.
Availability: Product is built to order.
Ship date: 3 weeks
$16.76

Design
Mathematically designed to produce the turns ratio for microphone or line level signal needed.

Primary (Input)
This is an unbalanced input with impedance taps of 5K Ohms, 10K Ohms, and 20K Ohms.

Secondary (Output)
This is an unbalanced output with impedance taps of 5K Ohms, 10K Ohms, and 20K Ohms.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's glass filled bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

 

Design
Mathematically designed to produce the turns ratio for microphone or line level signal needed.

Primary (Input)
This is an unbalanced input with impedance taps of 5K Ohms, 10K Ohms, and 20K Ohms.

Secondary (Output)
This is an unbalanced output with impedance taps of 5K Ohms, 10K Ohms, and 20K Ohms.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
EDCOR's glass filled bobbin with black finishing tape.

Termination/Mounting
This unit is designed for printed circuit board mounting. For footprint and suggested hole and pad size please see the dimensional drawing.

 

Products specifications
Wattage 0.5W
Input Maximum Voltage (20Hz.) 8Vrms
Input Maximum Voltage (40Hz.) 16Vrms
Primary (input) Impedance 5K, 10K, & 20K Ohms
Secondary (output) Impedance 5K, 10K, & 20K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.18 lbs.
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Product Files
Dimensional Drawings
Products specifications
Wattage 0.5W
Input Maximum Voltage (20Hz.) 8Vrms
Input Maximum Voltage (40Hz.) 16Vrms
Primary (input) Impedance 5K, 10K, & 20K Ohms
Secondary (output) Impedance 5K, 10K, & 20K Ohms
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss 0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination 8 pin PCB
Mounting Printed circuit board mounted (PCB)
Weight 0.18 lbs.
Product tags