3M 1318-1 1-Mil. Polyester Film Electrical Insulating Tape.
3M™ 1318 Tape is a polyester film tape with acrylic pressure-sensitive adhesive. It has excellent flagging resistance and solvent resistance, making it well suited for applications where cleaning solvents and mineral oil are present. It consists of materials that are represented in many UL Recognized Insulation Systems and has a UL 130°C temperature rating. It offers good wet grab, excellent shelf life.
Features:
- UL Recognized Class 130°C
- Excellent Flagging Resistance
- Solvent resistant without thermosetting
- Excellent Shelf Life
Adhesive | Acrylic |
Backing | Polyester film |
Backing Thickness [1] | 1.0 mil (25 micron) |
Total Thickness | 2.5 mils / 0,063 mm |
Colors-Designation | Yellow, White, Black |
Temperature Class | 130°C (266°F) |
Dielectric Breakdown [1] | 5,500 Volts |
Insulation Resistance [1] (megohms) | >1 x 106 |
Breaking Strength1 | 25 lbs./in (44N/10mm) |
Elongation [1] (% at break) | 100 |
Electrolytic Corrosion Factor [2] | 1.0 |
Note:The above are typical values and should not be used in writing specifications.
[1] Test Method ASTM D 1000
[2] UL-recognized for flame retardancy per UL510, Product Category OANZ2, File E17385
3M 11 Acetate Cloth Electrical Insulating Tape.
Features:
- This is a printable tape that has a resin- and varnish-absorptive black acetate cloth backing and is on a 3 inch paper core.
- This tape's excellent conformability makes it a good choice for coil wrappings applications up to 105°C.
Color | Black |
Component | 3M-11 |
Adhesion Strength | 40 Ounce |
Adhesive Material | Thermosetable Rubber Resin |
Backing Material | Acetate Cloth |
Breaking Strength | 35 Pound Per Inch (Of Width) |
RoHS | Yes |
Dielectric Breakdown | 2000 Volt |
Electrolytic Corrosion Factor | 1.0 |
Elongation | 10 Percent |
Insulation Resistance | 2 x 10^4 megohms |
Maximum Operating Temperature (Celsius) | 105 Degree Celsius |
Tape Thickness | 7.0 Milli-inch (mil) |
Tape Total Thickness | 7 Milli-inch |
Tape Total Thickness (metric) | 0.177 mm |
Note:The above are typical values and should not be used in writing specifications.