UMM-T Series - 1/2W PC mounted unbalanced line matching transformers.
UMM-T Series - 1/2W PC mounted unbalanced line matching transformers.
UMM-T Series - 1/2W PC mounted unbalanced line matching transformers.

EDCOR Electronics Corporation

UMM-T Series - 1/2W PC mounted unbalanced line matching transformers.

Sale price$53.45 USD

Shipping calculated at checkout

SKU: UMM-T-1

Impedance:

Impedance

Quantity:
Quantity Discounts
10 pcs 25 pcs 100 pcs 500+ pcs
5% off 10% off 15% off 20% off
Orders over 25 pcs may take longer. Please contact us for scheduling and dates.

Get shipping cost estimate in cart.

Design
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.

Primary (Input)
This has three unbalanced tapped input impedances. The impedances depends on the model.

Secondary (Output)
This has three unbalanced tapped output impedances. The impedances depends on the model.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
Injection molded Nylon 6/6 with the addition of 30%-35% glass fibers. The addition of glass fibers allows a higher heat deflection temperature and it brings the material to a class HB UL temperature classification.

Surface Mounting
The transformer is mounted on a printed circuit board. The board is designed for surface mounting with the use of four screws (not provided) or with double back tape (not provided). See dimensional drawing.

Transformer Models

Model Max. V (20Hz.) Max. V (40Hz.) Input "Z" Output "Z"
UMM-T-1 5V 10V 150/300/600 150/300/600
UMM-T-2 4V 8V 150/600/10K 150/600/10K
UMM-T-3 4V 8V 150/5K/10K 150/5K/10K
UMM-T-4 5V 10V 600/1.2K/2.4K 600/1.2K/2.4K
UMM-T-5 6V 12V 600/10K/15K 600/10K/15K
UMM-T-6 6V 12V 1K/2.5K/5K 1K/2.5K/5K
UMM-T-7 6V 12V 2.5K/5K/10K 2.5K/5K/10K
UMM-T-8 8V 16V 5K/10K/20K 5K/10K/20K
UMM-T-9 10V 20V 10K/15K/30K 10K/15K/30K
UMM-T-10 1.4V 1.4V 4/8/16 4/8/16
UMM-T-11 2V 2V 8/16/45 8/16/45
UMM-T-12 2V 2V 16/45/200 16/45/200
UMM-T-13 4V 4V 45/200/600 45/200/600

Specifications

Transformer UMM Series
Wattage 0.5W
Input Maximum Voltage Depends on model.
Input Unbalanced
Primary (input) Impedance Depends on model.
Output Unbalanced
Secondary (output) Impedance Depends on model.
Turns Ratio Depends on model.
Winding Configuration Interleave Winding
Frequency Response 20~20K Hz., <1dBu
THD+Noise <0.05% @ 1K Hz.
Insertion Loss <0.5 dB
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class HB
Coil Finish Wrapping Polyester Film Electrical Insulating Tape
Core Size
EI38 (0.375" x 0.375")
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Transformer Insulation Clear air dry polyester varnish
Termination Eurostyle connectors
Mounting
Surface Mounted
Printed Circuit Board
FR-4
Weight 0.3 lbs.
Compliance RoHS REACH
Dimensional Drawing 15000-EI037-037-0T
3D Model (STEP)
15000-EI037-037-0T