XC75-1.5H-250mA - 1.5H, 250mA choke.
XC75-1.5H-250mA - 1.5H, 250mA choke.

EDCOR Electronics Corporation

XC75-1.5H-250mA - 1.5H, 250mA choke.

Sale price$38.25 USD

Shipping calculated at checkout

SKU: XC75-1.5H-250mA

Quantity Discounts
10 pcs 25 pcs 100 pcs 500+ pcs
5% off 10% off 15% off 20% off
Orders over 25 pcs may take longer. Please contact us for scheduling and dates.

Get shipping cost estimate in cart.

Mathematically designed to produce 1.5H at 250mA DC. A lower DC current will slightly increase inductance.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
Injection molded Nylon 6/6 with the addition of 30%-35% glass fibers. The addition of glass fibers allows a higher heat deflection temperature and it brings the material to a class HB UL temperature classification.

The terminations are UL1015 20 ga. color coded lead wire around 15 inches (38cm) long. 

This unit comes with steel zinc plated channel/frame for mounting with the use of two screws. See dimensional drawing.


Inductance 1.5H
Maximum Current 250mA
DC Resistance 17 Ω
Frequency 120 Hz.
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class HB
Coil Finish Wrapping Polyester Film Electrical Insulating Tape
Core Size
EI75 (0.75" x 1")
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation Clear air dry polyester varnish
Termination 15" (38cm) UL1015, 20 ga. lead wire
Mounting Zinc plated channel/frame
Mounting Orientation Horizontal
Weight 1.4 lbs.
Compliance RoHS REACH
Dimensional Drawing 15000-EI075-100-01