XPWR191 - 200V@40mA & 8.5V@1.5A
XPWR191 - 200V@40mA & 8.5V@1.5A

EDCOR Electronics Corporation

XPWR191 - 200V@40mA & 8.5V@1.5A

Sale price$33.05 USD

Shipping calculated at checkout

SKU: XPWR191-120/240

Primary Voltage:

Primary Voltage

Quantity Discounts
10 pcs 25 pcs 100 pcs 500+ pcs
5% off 10% off 15% off 20% off
Orders over 25 pcs may take longer. Please contact us for scheduling and dates.

Get shipping cost estimate in cart.

Mathematically designed to produce the specified voltage(s) when loaded.

Primary (Input)
Designed for 120V or 240V at 50/60Hz.

Secondary (Output)
This transformer has multiple voltage windings, 200V at 40mA and 8.5V at 1.5A.

Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.

The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.

The Bobbin
Injection molded Nylon 6/6 with the addition of 30%-35% glass fibers. The addition of glass fibers allows a higher heat deflection temperature and it brings the material to a class HB UL temperature classification.

This unit is designed for mounting on a printed circuit board. For footprint and suggested hole and pad size, see dimensional drawing.


Primary (input) Voltage Depends on model
Secondary (output) Voltage 200V@40mA & 8.5V@1.5A
Winding Configuration Primary-Secondary
Bobbin Material Nylon 6/6 GF-30
Flammability Rating Class HB
Coil Finish Wrapping Polyester Film Electrical Insulating Tape
Core Size
EI75 (0.75" x 0.87")
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation Clear air dry polyester varnish
Termination 12 pin PCB
Printed circuit board (PCB)
Mounting Orientation Laydown
Weight 0.75 lbs.
Compliance RoHS REACH
Dimensional Drawing 15000-EI075-087-P12