EDCOR Electronics Corporation
XSM-LD Series - 2-1/2W balanced or unbalanced line matching transformers.
Impedance/Turns Ratio
| Quantity Discounts | ||||
|---|---|---|---|---|
| 10 pcs | 25 pcs | 100 pcs | 500+ pcs | |
| 5% off | 10% off | 15% off | 20% off | |
| Orders over 25 pcs may take longer. Please contact us for scheduling and dates. | ||||
Get shipping cost estimate in cart.
Design
These audio matchers use high quality low noise components to deliver broadcast and recording quality sound.
Primary (Input)
Designed for a balanced or unbalanced line level signal.
Secondary (Output)
Designed for a balanced or unbalanced line level signal.
Magnet Wire
All units are wound with the finest virgin copper magnet wire. All windings use heavy insulated wire to provide excellent manufacturing yield, lower customer cost and superior life.
The Core
EDCOR uses the finest M6 line grain oriented steel cores. Each unit is hand stacked to assure at least 92% stack.
The Bobbin
Injection molded Nylon 6/6 with the addition of 30%-35% glass fibers. The addition of glass fibers allows a higher heat deflection temperature and it brings the material to a class HB UL temperature classification.
Termination
The terminations are UL1007, 24 ga. color coded lead wire around 9 inches (23cm) long.
Mounting
This unit comes with steel zinc plated channel/frame for mounting with the use of two screws. See dimensional drawing.
Specifications
| Wattage | 2.5W |
| Input Maximum Voltage | 10Vrms |
| Input | Balanced or Unbalanced |
| Primary (input) Impedance | Depends on model. |
| Output | Balanced or Unbalanced |
| Secondary (output) Impedance | Depends on model. |
| Turns Ratio | Depends on model. |
| Winding Configuration | Interleave Winding |
| Frequency Response | 20~20K Hz., <1dBu |
| THD+Noise | <0.05% @ 1K Hz. |
| Frequency Response/THD+Noise Plot | XSM600/600, XSM600/10K, XSM10K/600, XSM10K/10K, XSM15K/15K |
| Insertion Loss | <0.5 dB |
| Bobbin Material | Nylon 6/6 GF-30 |
| Flammability Rating | Class HB |
| Coil Finish Wrapping | Polyester Film Electrical Insulating Tape |
| Core Size |
EI63 (0.625" x 0.75") |
| Core Material | M-6 29 ga. grain oriented lamination steel |
| Secondary Insulation | Clear air dry polyester varnish |
| Termination | 9" (23cm) UL1007 24 ga. lead wire |
| Mounting | Zinc plated channel/frame |
| Mounting Orientation | Horizontal |
| Weight | 0.75 lbs. |
| Compliance | RoHS & REACH |
| Dimensional Drawing | 15000-EI625-075-01 |